Since iPhone models do not come with Touch ID anymore, facial recognition is the prominent way of locking the screen. Though passcode is still in use and needed intermittently, you need a Face ID to make use of the iPhone to its full potential. Face ID not only helps to protect your device but also allows you to finish slew of tasks with a mere glance. If you are struggling with Face ID setup not working in iPhone, here are some common measures that can help to fix the issue.
Face ID and TrueDepth Camera
iPhone detects your face including whether you are looking at the phone or not using a TrueDepth camera system located on top of the front screen. This is not a single front camera as many users think, it is a system of an Infrared Camera, a Fluid Illuminator and a Dot Projector. Below is the image from Apple showing the TrueDepth camera setup.

So, make sure your screen is not covered with dust or water on the top area and the scratch protector is not filled with air thus hiding the camera. Before you assume Face ID is having problems, here are some situations where iPhone will prompt you for passcode though Face ID is enabled:
- You reached SOS screen (for example to call an emergency contact).
- Restarted iPhone or 5 times failed to unlock with face.
- Enabled device Lost Mode in Find My.
- iPhone not locked for 48 hours or Face ID not used for last 4 hours.
You will be prompted to enter the passcode to enable Face ID in the above-mentioned situations. So, passcode is important and unavoidable even though you have enabled Face ID.

If you still think, there are problems with your Face ID (either not available or not working), follow the below suggestions.
1. Check Face ID is Enabled
You can enable Face ID for system actions like unlocking iPhone, during payment, autofill passwords, etc. In addition, you can also enable Face ID for supported apps. For example, it is possible to lock incognito tabs in Chrome app with Face ID when you close and reopen the app.

So, make sure to enable the Face ID for the required feature or apps.
- Tap on “Settings” app and go to “Face ID & Passcode” section. Enter your passcode to unlock the screen.

- Enable the default features under “Use Face ID For” section. You have iPhone Unlock, iTunes & App Store, Wallet & Apple Pay and Password AutoFill options.

- Tap on “Other Apps” and turn on the apps that you want to use with Face ID feature.

You can also simply turn off any item and then then turn on again to check if that works for you.
2. Add Alternate Appearance
This helps to add an alternate facial recognition so that the device can work smarter to identify the changes in your face.
- Go to “Settings > Face ID & Passcode” section and tap on “Set Up an Alternate Appearance”.

- Follow the steps to add your Face ID.

3. Attention for Face ID
Face ID not only works with facial recognition, but also needs you to look at the TrueDepth camera. Under “Face ID & Passcode” settings, check whether “Require Attention for Face ID” option is enabled. This helps to unlock the screen only when your eyes are looking at the camera.

Face ID attention is enabled by default in iPhone for added security which will also enable all “Attention Aware Features”. However, it will affect the working of Face ID when you wear sunglasses or something covering your eyes. If necessary, you can disable “Require Attention for Face ID” option. iPhone will show you a warning and tap on “OK” to confirm your action.

4. Reset and Setup Face ID Again
If Face ID is still not working, then you can remove the setup and add your face again.
- Go to “Settings > Face ID & Passcode” section.
- Tap on “Reset Face ID” option showing in red link.
- Now, you will see a “Setup Face ID” link and tap on that.

- Follow the instructions to add your face again.

Note that you will not see any warning when tapping on “Reset Face ID” option. So, tap on it only when you have time to re-add your face.
5. Restart Your iPhone:
Sometimes, restarting your iPhone can help to resolve minor hiccups and make the Face ID working again.
- Go to “Settings > General” section and scroll down to the bottom.
- Tap on the “Shut Down” option and wait for the phone to completely shut down.

- Now, press and hold the right-side button till you see Apple logo.
- Enter the passcode to unlock your phone.
Now, check whether your Face ID is working with the restart.
6. Update iOS and App
Sometimes bugs from iOS or an app can affect the functionalities of Face ID.
- For Apps – Go to App Store and tap on your profile icon. Check any update is available for the app and bring your app to the latest version.
- For iOS – go to “Settings > General > Software Update” section and install the latest iOS version.

7. Reset iPhone Settings
The last resort you can try from your side is to reset all setting to factory defaults. Though this will not delete any data, you will lose all custom settings and you need to reset everything again. If you know what you are doing, go to “Settings > General” section and tap on “Transfer or Reset iPhone” option showing at the bottom. Select “Reset All Settings” and wait for the process to complete.

Final Words
Resetting Face ID, disabling attention or adding alternate appearance will solve the issue in most cases. However, damage in TrueDepth camera components can’t be fixed by yourself. In such a case, you may need to get in touch with Apple support for fixing your iPhone.





